DataDog/puppet-datadog-agent

Name: puppet-datadog-agent

Owner: Datadog, Inc.

Description: Puppet module to install the Datadog agent

Created: 2011-07-12 15:16:26.0

Updated: 2017-10-05 22:40:37.0

Pushed: 2018-01-15 00:51:30.0

Homepage:

Size: 696

Language: Ruby

GitHub Committers

User	Most Recent Commit	# Commits

Other Committers

User	Email	Most Recent Commit	# Commits

README

Puppet & Datadog

Description

A module to:

1. install the DataDog agent
2. to send reports of puppet runs to the Datadog service Datadog.

Releases

There are currently two actively maintained versions for the puppet module. To users on puppet >= 4.6.x, and possibly some older 4.x puppets, we recommend you use version 2.0+ of the module.

For users running on older versions of puppet the legacy module, series 1.x, should support most use-cases.

Hopefully a majority of users will be able to use the newer module as many of the puppet versions supported in the 1.x series of the module have been EOL'd for a while now.

Some features might be back-ported if there's enough demand for it, but in general only maintenance will be performed on the 1.x series of the module. Future feature development will be performed on the newer puppet module.

Version 2.x

Requirements

Puppet >=4.6.x and <=5.3.x (we may work with newer versions, but untested). For detailed informations on compatibility, check the module page on the Puppet forge.

Installation

Install datadog_agent as a module in your Puppet master's module path.

puppet module install datadog-datadog_agent

Upgrade from the previous module version 1.x

Most of the manifests should be backward compatible. However, there are important changes to the main manifest:

• By default datadog agent 6.x will now be installed.
• You may still setup agent 5.x in your nodes by seting the agent5_enable boolean parameter to True
• Enhanced support for our APM tracing agent
• Enhanced support for our Process agent
• Enhanced support for additional agent6 options
• APM tracing and Process agents are now opt-in options and will be disabled by default.
• Main datadog_agent class has parameters to enable and configure the agents easily.
• Increased granularity for apt/yum repo configuration
• New location for datadog puppet reporting configuration

Version 1.x

Requirements

Puppet >=2.7.x and <=4.2.x (we may work with newer versions, but untested). For detailed informations on compatibility, check the module page on the Puppet forge.

Installation

Install datadog_agent as a module in your Puppet master's module path.

puppet module install datadog-datadog_agent --version 1.12.1

Upgrade from previous git manual install 0.x (unreleased)

You can keep using the datadog module but it becomes legacy with the release of datadog_agent 1.0.0. Upgrade to get new features, and use the puppet forge system which is way easier for maintenance.

• Delete the datadog module rm -r /etc/puppet/modules/datadog
• Install the new module from the puppet forge puppet module install datadog-datadog_agent
• Update your manifests with the new module class, basically replace datadog by datadog_agent

Usage

The following instructions should hold true for both puppet module versions (1.x, 2.x).

Note: remember 2.x will install agent6 by default, whereas 1.x defaults to agent6.

Once the datadog_agent module is installed on your puppetserver/puppetmaster, there's a tiny bit of configuration that needs to be done.

1. Update the default class parameters with your API key

2. Specify the module on any nodes you wish to install the DataDog Agent.

   ```
   include datadog_agent
   ```
   

   Or assign this module using the Puppet style Parameterized class:

   ```
   class { 'datadog_agent':
     api_key => "yourkey",
   }
   ```
   

   On your puppetserver, enable reporting:

   ```
   class { 'datadog_agent':
     api_key            => "yourkey",
     puppet_run_reports => true,
   }
   ```
   

   To support reporting, your Puppet master needs to have the dogapi gem installed, to do that either run the puppet agent on your master with this configuration or install it manually with gem. Please note, you may have two restart your puppetserver service for the freshly installed dogapi-rb gem to be picked up. Please note, on version 2.x of the module puppetserver_gem is defined as a module dependency, it should be installed automatically when the module is installed. Please note, on version 1.x and if on Puppet Enterprise or POSS (ie. >=3.7.0) there is a soft dependency for reporting on the puppetserver_gem module. Install with puppet module install puppetlabs-puppetserver_gem - installing manually with gem will not work. Please note, on version 1.x and older puppets you may install dogapi-rb with gem as the system-level ruby is used Also note, on version 1.x of the puppet module, the gem provider is configurable, so you can set it to puppetserver_gem (already set by default) if on PE/POSS (>=3.7.0) or gem if on older versions of puppet

3. Include any other integrations you want the agent to use, e.g.

   include 'datadog_agent::integrations::mongo'
   

Reporting

Other than ensuring that dogapi-rb is available on your system as we explained earlier, a few additional steps should be conducted.

To enable reporting of changes to the Datadog timeline, enable the report processor on your Puppet master, and enable reporting for your clients. The clients will send a run report after each check-in back to the master.

Make sure you enable the puppet_run_reports option to true in the node configuration manifest for your master.

s { "datadog-agent":
api_key => "<your_api_key>",
puppet_run_reports => true
# ...

On puppet >=4.x the location for your configuration file will be: /etc/puppetlabs/puppet/puppet.conf On older puppets the location should be: /etc/puppet/puppet.conf

Add these configuration options in the pertinent location:

n]
 need to modify this section
.

ter]
able reporting to datadog
rts=datadog_reports
 you use other reports already, just add datadog_reports at the end
ports=store,log,datadog_reports
.

nt]
.
insync=true
rt=true

And on all of your Puppet client nodes add the following in the same location::

nt]
.
rt=true

If you get

 Could not send report:
r 400 on SERVER: Could not autoload datadog_reports:
s Datadog_reports is already defined in Puppet::Reports

Make sure reports=datadog_reports is defined in [master], not [main].

Step-by-step

This is the minimal set of modifications to get started. These files assume puppet 4.5.x or higher.

/etc/puppetlabs/puppet/puppet.conf

[master]
report = true
reports = datadog_reports
pluginsync = true

[agent]
report = true
pluginsync = true

Note: This may be file /etc/puppet/puppet/puppet.conf on older puppets

/etc/puppetlabs/code/environments/production/manifests/10_nodes.pp

node "default" {
    class { "datadog_agent":
        api_key => "INSERT YOU API KEY HERE",
    }
}
node "puppetmaster" {
    class { "datadog_agent":
        api_key            => "INSERT YOUR API KEY HERE",
        puppet_run_reports => true
    }
}

Note: This may be file /etc/puppet/manifests/nodes.pp on older puppets

Run Puppet Agent

sudo systemctl  /etc/init.d/puppetmaster restart
sudo puppet agent --onetime --no-daemonize --no-splay --verbose

You should see something like:

info: Retrieving plugin
info: Caching catalog for alq-linux.dev.datadoghq.com
info: Applying configuration version '1333470114'
notice: Finished catalog run in 0.81 seconds

Verify on Datadog

Go to the Setup page and you should see this

If you click on the tile, you may reconfirm it's been automatically installed.

Search for “Puppet” in the Stream and you should see something like this:

Masterless puppet

This is a specific setup, you can use https://gist.github.com/LeoCavaille/cd412c7a9ff5caec462f to set it up. This applies to older puppets and is untested on >=4.x puppet versions.

Client Settings

Tagging client nodes

The datadog agent configuration file will be recreated from the template every puppet run. If you need to tag your nodes, add an array entry in hiera

    datadog_agent::tags:
    - 'keyname:value'
    - 'anotherkey:%{factname}'

Here are some of the other variables that be set in the datadog_agent class to control settings in the agent:

2.x

| variable name | description | | ————- | ———– | | collect_ec2_tags | Set this to yes to have an instance's custom EC2 tags used as agent tags | | collect_instance_metadata | Set this to yes to have an instance's EC2 metadata used as agent tags | | dd_url | datadog intake server URL. You are unlikely to need to change this | | host | overrides the node's hostname | | local_tags | an array of key:value strings that will be set as tags for the node | | non_local_traffic | set this to allow other nodes to relay their traffic through this one | | agent5_enable | boolean to install agent5 and override agent6 default | | apm_enabled | boolean to enable the APM agent; defaults to true | | process_enabled | boolean to enable the process agent; defaults to true | | agent6_extra_options | hash to provide additional configuration options to agent6. |

NOTE: agent6_extra_options may be used to provide a fine grain control of additional agent6 config options. A deep merge is performed that may override options provided in the datadog_agent class parameters

1.x

| variable name | description | | ————- | ———– | | collect_ec2_tags | Set this to yes to have an instance's custom EC2 tags used as agent tags | | collect_instance_metadata | Set this to yes to have an instance's EC2 metadata used as agent tags | | dd_url | datadog intake server URL. You are unlikely to need to change this | | host | overrides the node's hostname | | local_tags | an array of key:value strings that will be set as tags for the node | | non_local_traffic | set this to allow other nodes to relay their traffic through this one | | agent6_enable | boolean to install agent6 and override agent5 default |

Proxy Settings

If you need to connect to the internet through a proxy, you can set proxy_host, proxy_port, proxy_user and proxy_password.

Module Development and Testing

Clone the repo

clone git@github.com:DataDog/puppet-datadog-agent.git
uppet-datadog-agent

Install dependencies

le install
 lint              # Check puppet manifests with puppet-lint / Run puppet-lint
 spec              # Run spec tests in a clean fixtures directory
 syntax            # Syntax check Puppet manifests and templates
 syntax:manifests  # Syntax check Puppet manifests
 syntax:templates  # Syntax check Puppet templates
install pre-commit
commit install

Contributing

1. Fork it
2. Create your feature branch (git checkout -b my-new-feature)
3. Commit your changes (git commit -am 'Add some feature')
4. Push to the branch (git push origin my-new-feature)
5. Create new Pull Request